> > example.  I'm sort of concerned that you want to run 20 MHz and use a
> > plugboard.  You may have oscillator problems and since you don't have

I never had any problems with either a solderless breadboard or a prototyped
exp-board + wires. Used PICs up to 20 MHz, SX's up to 50 Mhz (with a canned
oscillator, not with xtal or resonator). Note: I always use ample
decoupling, at least 22..100u on the board, and a 0.1u at each power strip
(two if the strips are longer).

Wouter van Ooijen
--
Van Ooijen Technische Informatica: http://www.voti.nl
Jal compiler, Wisp programmer, WLoader bootloader, PICs kopen

--
http://www.piclist.com#nomail Going offline? Don't AutoReply us!
email listserv@mitvma.mit.edu with SET PICList DIGEST in the body