Hi Folks
Just trying to see what can be done with a 16F87A, I tried to kick it over
with an RC oscillator as described in the various MicroChip appnotes.
(Resistor from supply to oscillator pin, capacitor from pin to ground)
I can't seem to get it going. It starts OK with all the crystals I have,
anywhere between a couple of hundred KHz, all the way out to 16MHz, but not
with a resistor-capacitor pair. I have tried 40pf/5K (5MHz), 20pf/5K
(10MHz), 40pf/6.2K (4MHz) plus other combinations that are equally
reliable - in that they don't start!
I am doing this on a breadboard, so I guess there is plenty of stray
capacitance - is this the problem. - ? Suggestions, comments, abuse ...

Peter L

First posting here, so please excuse if this has been covered a million
times already. (I can't find anything helpful in archives).

--
http://www.piclist.com#nomail Going offline? Don't AutoReply us!
email listserv@mitvma.mit.edu with SET PICList DIGEST in the body