At 10:04 AM 7/3/02 +0100, Michael Rigby-Jones wrote:

>IIRC the way to achieve minimal distortion with the LM324 was to use a
>resistor from the output to Vcc to bias it into Class A operation (again at
>the expense of efficiency).

Actually, NS shows the resistor from the output to ground.  The app notes
suggest 6K2.

dwayne

--
Dwayne Reid   <dwayner@planet.eon.net>
Trinity Electronics Systems Ltd    Edmonton, AB, CANADA
(780) 489-3199 voice          (780) 487-6397 fax

Celebrating 18 years of Engineering Innovation (1984 - 2002)
  .-.   .-.   .-.   .-.   .-.   .-.   .-.   .-.   .-.   .-
     `-'   `-'   `-'   `-'   `-'   `-'   `-'   `-'   `-'
Do NOT send unsolicited commercial email to this email address.
This message neither grants consent to receive unsolicited
commercial email nor is intended to solicit commercial email.

--
http://www.piclist.com#nomail Going offline? Don't AutoReply us!
email listserv@mitvma.mit.edu with SET PICList DIGEST in the body