Sure your not looking at the solder paste, solder resist layers?

 >>  Spehro,
 >>  I'm trying to use SMD components.  When I created the padstacks I
 >>  did it by the method described in the help file.  I went, select from
 >>  spreadsheet then esc then new.  Created it the size I wanted etc.

 >>  The problem I having is the pad appears on all layers and since it's smd
 >>  I want it only on the topmost layer.  But I can't figure out how to
 >>  delete the extra pad stacks.

 >>  Thanks for all your help,
 >>  Aaron

 >>  --
 >>  http://www.piclist.com hint: The list server can filter out subtopics
 >>  (like ads or off topics) for you. See http://www.piclist.com/#topics








Thanks,
Richard Sloan
__________________________________________________________
The Mind Factory INC (Canada)
(613) 825-4758 phone               =20
(613) 825-7758 fax
Richard Sloan                      =20
rsloan@themindfactory.com
www.themindfactory.com          =20

* Custom MP3 Development=20
* Low Power FM Transmitters
* Custom Smart Cards
* Music / Speech Playback Systems
* Electronic Manufacturing
* Hardware / Firmware / Software Design
* Schematic and PCB layout
* 8051, 68HC11, PIC, AVR
* MP3, FAT16/32, IR, IRDA, USB, X10, VIDEO, TCP/IP, LCD, COMPACT FLASH

* ALL PRICES QUOTED IN US$ UNLESS OTHERWISE NOTED

--
http://www.piclist.com hint: The list server can filter out subtopics
(like ads or off topics) for you. See http://www.piclist.com/#topics