Check with Sterling Instruments 516-328-3300
(Note: area code may have changed.)

They are out of Hyde Park, NY.

Gordon Varney
www.iamnee.com

> Can anyone recommend good sources for low-cost plastic
> gears?
>
> I specifically need a 0.5-mode gear with 60, 90, or 120
> teeth for the pet-feeder project, but the only ones I've
> found are over US$10 each.  A similar-sized standard part
> is a buck or less.  Not sure why the big difference, but
> there's got to be a million other sources that may do
> better.
>
> Cheers,
> -Neil.
>
> --
> http://www.piclist.com hint: The list server can filter out subtopics
> (like ads or off topics) for you. See http://www.piclist.com/#topics
>
>
>

--
http://www.piclist.com hint: The list server can filter out subtopics
(like ads or off topics) for you. See http://www.piclist.com/#topics