Without a current limiting resistor on the base of the transistor, you =
stand a good chance of damaging it or perhaps the gate on the MAX232. =
Try it with a 1K resistor.


-----Original Message-----
From: PSL [mailto:psln@STARHUB.NET.SG]
Sent: 30 June 2002 07:33
To: PICLIST@MITVMA.MIT.EDU
Subject: Re: [PIC]: Reset PIC using Com Port


Yes
I have use the RTS PIN to reset it
RX and TX Pin are used.
Will it have any problem in power consumption?

--
http://www.piclist.com hint: To leave the PICList
mailto:piclist-unsubscribe-request@mitvma.mit.edu