Yes I have use the RTS PIN to reset it RX and TX Pin are used. Will it have any problem in power consumption? Regards ----- Original Message ----- From: "Joe Farr" To: Sent: Sunday, June 30, 2002 1:45 PM Subject: Re: [PIC]: Reset PIC using Com Port Well, I'd place a current limiting resisor on the base of the transistor. Also, did you mean to use the RTS (Request To Send) pin as a reset ? -----Original Message----- From: PSL [mailto:psln@STARHUB.NET.SG] Sent: 30 June 2002 06:30 To: PICLIST@MITVMA.MIT.EDU Subject: [PIC]: Reset PIC using Com Port Hi all currently I am using the circuit in the attach file to reset my PIC by com port. Just to check is this method advisable and is there any better way. regards -- http://www.piclist.com hint: To leave the PICList mailto:piclist-unsubscribe-request@mitvma.mit.edu -- http://www.piclist.com hint: To leave the PICList mailto:piclist-unsubscribe-request@mitvma.mit.edu