Thanks for the info.

Do you get C source level debugging ?  (e.g. single stepping over the C
source code).

Tal

> -----Original Message-----
> From: pic microcontroller discussion list
> [mailto:PICLIST@MITVMA.MIT.EDU]On Behalf Of Larry G. Nelson Sr.
> Sent: Saturday, June 29, 2002 3:28 PM
> To: PICLIST@MITVMA.MIT.EDU
> Subject: Re: [PIC]: Any good C/Asm/Source-Debugger solution ?
>
>
> I use the ICE2000 with HiTech C or the ASM in MPLAB. It is all integrated
> together and works fine.
> Larry
>
>
> At 10:01 PM 6/26/02 -0700, you wrote:
> >Hello,
> >
> >I am looking for a good C / Asm / source level debugger for
> 12F675 (8 pin)
> >and 16F877 PIC's.
> >
> >I looked around at the ICE and ICD from Microchip and ICEPIC 2
> but could not
> >find much information about an integrated C/Asm environment with source
> >level debugging. Having minimal interference with the device
> operation and
> >resources and a real time trace memory is a plus.
> >
> >Any recommendation and suggestion will be greatly appreciated.
> >
> >Thanks,
> >
> >Tal
> >
> >--
> >http://www.piclist.com hint: The list server can filter out subtopics
> >(like ads or off topics) for you. See http://www.piclist.com/#topics
>
> Larry G. Nelson Sr.
> mailto:L.Nelson@ieee.org
> http://www.ultranet.com/~nr
>
> --
> http://www.piclist.com#nomail Going offline? Don't AutoReply us!
> email listserv@mitvma.mit.edu with SET PICList DIGEST in the body
>
>

--
http://www.piclist.com#nomail Going offline? Don't AutoReply us!
email listserv@mitvma.mit.edu with SET PICList DIGEST in the body