Please ignore my earlier babblings.

Note to self:

Don't forget that the MCLR/ pin is subjected to Vpp. The DS1233 won't
tolerate that high a voltage. It has to be isolated from the pin
during ICD use.


Sorry, Bob


On Wed, 26 Jun 2002 16:23:57 -0700, Bob Barr wrote:

>I'm building a proto board to do ICD debugging with a 16F877 and then
>switch over to the 16C765 USB chip for the final application. I've put
>in a multi-pole switch to select between ICD and normal operation.=20
>

<snip>

--
http://www.piclist.com hint: PICList Posts must start with ONE topic:
[PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads