Unfortunately, I never finished.  I'm currently working on writing a suite
of VB.NET programs and have just sold my first 2 copies.  Once this dies
down a bit, I'll get back to work finishing it.

Right now, the hardware is done and the low level routines are finished.
There's some simple FAT routines you could start with, written in Parrallax
Basic for the BS2, on my site.  All the documentation for FAT16 and FAT32
can be found here:  http://www.microsoft.com/hwdev/hardware/fatgen.asp

My site is here:  http://www.barrymichels.com/ide


Barry


----- Original Message -----
From: "JayHanson (rr)" <JayHanson@HAWAII.RR.COM>
To: <PICLIST@MITVMA.MIT.EDU>
Sent: Wednesday, June 26, 2002 2:35 AM
Subject: [OT]: CompactFlash & PIC


> I want to use a compactflash card for PIC16F877 data logging.  But I am
> uncertain about how to record the data in a way that will allow me to
> subsequently insert the card into one of those little readers attached to
a
> Win2k USB port and transfer the data to my hard drive.
>
> Here is where I am:
>
> #1. Presumably, I can just write the stuff with the 877 and come up with
> some primitive VB program to read the data from the compactflash card a
> sector at a time OR
>
> #2. Utilize a FAT16 format with the 877 and just drag the file off the
> compactflash card and into my hard drive.
>
> (I would prefer not offloading the compactflash via rs232).
>
> As I recall, some time ago someone was working on compactflash FAT support
> for the PIC.  Did they ever complete the project?
>
> Any other ideas?  Any help or comments will be greatly appreciated....
>
> Jay
>
> --
> http://www.piclist.com hint: PICList Posts must start with ONE topic:
> [PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads
>
>
>

--
http://www.piclist.com hint: PICList Posts must start with ONE topic:
[PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads