brusque

i think it's impossible
you have to do it in 2 steps
first (auto)route your finest track
then you can modify the thickness of the wanted tracks (click on change,width,choose width)

good luck

jean-marie
on7en

-----Original Message-----
From: Edson Brusque (Listas) [mailto:brusque.listas@CITRONICS.COM.BR]
Sent: 26 June 2002 14:46
To: PICLIST@MITVMA.MIT.EDU
Subject: Re: [EE]: Eagle question. was: Anyone speak decoupling/filter
caps?


Hello,

Alexandre Guimarces wrote:
>     Take a look at http://www.dvanhorn.org/Micros/All/Bypass.php . David
> wrote a nice and easy paga about it. Some of his tips may be questioned by
> some, such as the thinner tracks from the main power track to the bypass
> capacitor but many people think it is the best way. It should clear your
> doubts.

    Someone knows how to make Eagle router use a thicker track at one point
of the circuit and a thinner track at another, being the two tracks the same
signal?

    Or things Like:

    Transformer============7805----------Digital stuffs
                             |
                             '-----------Analog circuits

    Thanks,

    Brusque

-----------------------------------------------------------------
Edson Brusque                 C.I.Tronics Lighting Designers Ltda
Research and Development               Blumenau  -  SC  -  Brazil
Say NO to HTML mail                          www.citronics.com.br
-----------------------------------------------------------------

--
http://www.piclist.com hint: PICList Posts must start with ONE topic:
[PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads


**** DISCLAIMER ****
"This e-mail and any attachments thereto may contain information
which is confidential and/or protected by intellectual property
rights and are intended for the sole use of the recipient(s) named above.
Any use of the information contained herein (including, but not limited to,
total or partial reproduction, communication or distribution in any form)
by persons other than the designated recipient(s) is prohibited.
If you have received this e-mail in error, please notify the sender either
by telephone or by e-mail and delete the material from any computer.
Thank you for your cooperation."

--
http://www.piclist.com hint: PICList Posts must start with ONE topic:
[PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads