Tony - please forgive me for disagreeing with you.

What you have written has two problems:  At the label Dlist, change 'addwf
PCL' to 'movwf PCL'  and change the (Dlist) in the statements with High and
Low with (Dilst+1).

The first problems is because you already have the correct address in W
when calling the jump table.  The second problem is because you need the
address of the start of the jump list.  You have shifted that address by 1
because of the 'addwf PCL'.

dwayne

At 01:56 PM 6/26/02 +1000, Tony Nixon wrote:
>This is one method...
>
>         clrf Offset
>GData   movlw High(DList)
>         movwf PCLATH
>         movlw Low(DList)
>         addwf Offset,W
>         btfsc STATUS,C
>         incf PCLATH,F
>         call DList
>         ; do whatever with data in W
>         incf LoopCount
>         movlw High(GData)       ; restore PCLATH
>         movwf PCLATH
>         goto GData
>
>         org 0xWhatEver
>
>DList   addwf PCL
>         retlw 0x00
>         retlw 0x01


--
Dwayne Reid   <dwayner@planet.eon.net>
Trinity Electronics Systems Ltd    Edmonton, AB, CANADA
(780) 489-3199 voice          (780) 487-6397 fax

Celebrating 18 years of Engineering Innovation (1984 - 2002)
  .-.   .-.   .-.   .-.   .-.   .-.   .-.   .-.   .-.   .-
     `-'   `-'   `-'   `-'   `-'   `-'   `-'   `-'   `-'
Do NOT send unsolicited commercial email to this email address.
This message neither grants consent to receive unsolicited
commercial email nor is intended to solicit commercial email.

--
http://www.piclist.com hint: PICList Posts must start with ONE topic:
[PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads