On Thu, 20 Jun 2002, Brendan Moran wrote:

>Hi,
>Does anyone know of somewhere to find hall effect sensors for extremely high
>field applications?  Like something that still operates at 0.35 Tesla.  I've
>checked several datasheets, and none of them specify the maximum output
>voltage, or the maximum field strength.
>
>I would assume that they just continue to operate until they run out of
>supply voltage, but I don't really believe that considering that on most
>devices, running 0.35T would put the output somewhere up around 5V.  I'd
>expect them to lose linearity long before that.

Obtain a bare Hall bridge (no electronics inside). This will work with any
fieldstrength (really). You just need to set the bias current low enough
and you may have to read the bridge in current mode (instead of voltage).

Peter

--
http://www.piclist.com hint: To leave the PICList
mailto:piclist-unsubscribe-request@mitvma.mit.edu