PIC18 instructions are 16 bits long while address refer to 8 bit locations. So, all instructions start on even addresses. Have a look at the absolute listing of your program. Harold On Wed, 19 Jun 2002 04:53:50 +0200 wouter van ooijen & floortje hanneman writes: > I am making my first steps into 18Fxxx programming. > When asembling something like > goto 1 > I get the warning 'Destination address must be word aligned'. I see > bo hints > in the 18F datasheet of such a restriction. The warning seems to > happen only > when the destination is specified as a value, not when it is a > label. What > is going on? > > Wouter van Ooijen > -- > Van Ooijen Technische Informatica: http://www.voti.nl > Jal compiler, Wisp programmer, WLoader bootloader, PICs kopen > > -- > http://www.piclist.com#nomail Going offline? Don't AutoReply us! > email listserv@mitvma.mit.edu with SET PICList DIGEST in the body > > FCC Rules Online at http://hallikainen.com/FccRules Lighting control for theatre and television at http://www.dovesystems.com Reach broadcasters, engineers, manufacturers, compliance labs, and attorneys. Advertise at http://www.hallikainen.com/FccRules/ . ________________________________________________________________ GET INTERNET ACCESS FROM JUNO! Juno offers FREE or PREMIUM Internet access for less! Join Juno today! For your FREE software, visit: http://dl.www.juno.com/get/web/. -- http://www.piclist.com#nomail Going offline? Don't AutoReply us! email listserv@mitvma.mit.edu with SET PICList DIGEST in the body