You've got me wondering now whether pin 9 and pin 14 of the header get extended through to the 2 pin header for the power on/off switch. I could take those two pins + a ground and power the pic and control the on/off, all without cutting into the psu wires. Going to take a meter out and check this... thanks ----- Original Message ----- From: "Brendan Moran" To: Sent: Wednesday, June 19, 2002 6:19 PM Subject: Re: [EE]: Cycling power remotely on an ATX PC > When I recieved the message I just sent, I noticed that the address for > that mac page was wrapped. If you just click on it, you will not get the > right page. > > Oh, yeah, there's another nifty feature you could add: you could make it so > that your PIC can monitor the power supply's state, using the PG or Power > Good pin. > > Brendan > > ----- Original Message ----- > From: "Brendan Moran" > To: > Sent: Wednesday, June 19, 2002 10:10 AM > Subject: Re: [EE]: Cycling power remotely on an ATX PC > > > > While I have verified that I did have those colours right, here's a site > > that should help: > > http://www.compute-aid.com/atxspec.html > > and one of the images on this page provides a colour-pin number cross > > reference: > > > http://www.xlr8yourmac.com/systems/ATX_G4_AGP_conversion/G4_AGP_to_ATX_case_ > > pg2.htm > > (I admit I find it funny that a *mac* site has a lot of info on *ATX* > power > > connectors...) > > I've attached the relevant image. > > -- > http://www.piclist.com#nomail Going offline? Don't AutoReply us! > email listserv@mitvma.mit.edu with SET PICList DIGEST in the body > > > -- http://www.piclist.com#nomail Going offline? Don't AutoReply us! email listserv@mitvma.mit.edu with SET PICList DIGEST in the body