There is no exemption from compliance, the exemption is from formal testing,
FCC filing and monetary penalties arising from creating the interference.

If one of your products is found to interfere with licensed equipment, the
user will be required to stop using the device. The FCC will contact you and
ask about the device. You will have to provide the FCC with enough details
about the hardware (schematics, etc.) to show that it is in an exempt class.
Your customer will not be allowed to use the device again until the
interference is reduced to a level that either satisfies the person who
filed the complaint or it meets FCC interference levels.

I've gotten the phone call from an FCC field engineer and was relieved that
the interfering product was one of our exempt devices. If it had been one of
our non-exempt products we would have been required to contact all our
customers and tell them to stop using the product until we could provide a
fix for the interference.

Paul

> -----Original Message-----
> From: pic microcontroller discussion list
> [mailto:PICLIST@MITVMA.MIT.EDU]On Behalf Of Drew Vassallo
> Sent: Saturday, June 15, 2002 10:51 PM
> To: PICLIST@MITVMA.MIT.EDU
> Subject: [PIC]: FCC exempt!
>
>
> Ok, I've reduced the operating speed of my model airplane monitor
> down from
> a 4 MHz crystal to a 1 MHz RC oscillator.  Looks like it works
> pretty well,
> except the LED display flickers a LITTLE bit between updates
> because of the
> overhead calculations.  No big deal, it's barely perceptible if you're not
> looking for it.
>
> So I gather that this means I'm exempt from FCC compliance, but do I still
> have to perform any sort of formal testing?  Or do I just wait for the FCC
> to complain and look into it on their own, only to find out that it's
> exempt?
>
> The only thing I'm at all concerned about is the fact that when I go to a
> production PCB, the traces will be laid out slightly differently so the
> capacitance might change the operating frequency.  I suppose I'll have to
> try it and change the R value at that time.
>
> --Andrew
>
> _________________________________________________________________
> Send and receive Hotmail on your mobile device: http://mobile.msn.com
>
>

--
http://www.piclist.com hint: PICList Posts must start with ONE topic:
[PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads