This would be called a geothermal heat pump. you could heat your house as well as cool your house with one of these. General rule: 1 Watt of energy = 2 Watt or more of heat (or heat removal) Alain Pelletier New Brunswick Canada ----- Original Message ----- From: "Rick C." To: Sent: Tuesday, June 11, 2002 12:30 AM Subject: Re: [OT]: Using well water to air condition home > Rather than tying up the list, one can link to the development of the system at: > http://www.pic101.com/projects/acwatersys.htm > Rick > > "M. Adam Davis" wrote: > > > So, Rick, any new news on spraying water on the condenser unit? > > > > I'm interested in doing something similar, and was going to send a > > general message to the list but checked the archives just in case. I > > thought we had someone mention it recently. > > > > -Adam > > > > Rick C. wrote: > > > > >This is currently being done commercially now. It hasn't caught up yet to the > > >home (domestic) market as it should, but I've seen the numbers and they are > > >promising. A large warehouse I know of in Frederick, MD, has such a system and > > >their heating/air conditioning bill is about $50 a month compared to a > > >conventional system in a comparable size building of about $450 a month. The > > >initial expense is a bit higher though, but it has already paid off. Plus, no > > >Freon involved. > > > > > >I have spray nozzles on two sides of my outdoor condenser unit that sprays well > > >water on the coils when the compressor comes on. This has made a noticeable > > >difference in the time the compressor runs (less on time and less cycling) when > > >cooling the house during the summer. I'm getting ready to make some measurements > > >to see just how much of a savings this will make. > > >Rick > > > > > >Rod Phillips wrote: > > > > > > > > > > > >>Hello to all, > > >> > > >>Here's an idea that I wanted to run past whoever is interested. > > >> > > >>I have 2 unused water wells on my property that are seperated by 100 feet. > > >>One well has a 30 inch diameter concrete casing and is 36 feet deep. The > > >>other well has an 18 inch diameter casing and is about 25 feet in depth. > > >> > > >>My idea is to pump water from well # 1 into a small, insulated pressure > > >>tank. At the tank outlet would be a solenoid valve to let the water flow > > >>into some sort of heat exchanger in the furnace plenum. Another valve would > > >>be located on the other side of the heat exchanger to discharge the warmed > > >>water into the second well. The plan would be to monitor air temperature in > > >>the plenum and when it has reached a certain limit open both valves to force > > >>the warmed water out. Additional temperature probes in the input and output > > >>lines could be used to determine when the exchanger is full of cold water. > > >>I have a probe in well # 1 now and the water temperature is 51 degrees. > > >> > > >>I would welcome any comments or experiences anyone has had along these > > >>lines. > > >> > > >> Rod > > >> > > >>-- > > >>http://www.piclist.com hint: PICList Posts must start with ONE topic: > > >>[PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads > > >> > > >> > > > > > >-- > > >http://www.piclist.com hint: PICList Posts must start with ONE topic: > > >[PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads > > > > > > > > > > > > > > > > > > > > > > > > > -- > > http://www.piclist.com hint: To leave the PICList > > mailto:piclist-unsubscribe-request@mitvma.mit.edu > > -- > http://www.piclist.com hint: To leave the PICList > mailto:piclist-unsubscribe-request@mitvma.mit.edu > > -- > http://www.piclist.com#nomail Going offline? Don't AutoReply us! > email listserv@mitvma.mit.edu with SET PICList DIGEST in the body > > -- http://www.piclist.com hint: To leave the PICList mailto:piclist-unsubscribe-request@mitvma.mit.edu