>
>To make it short, it was pretty obvious it died.

A helpful failure indicator is built-in. It is activated if you use high
enough current or voltage. The indication is auditive, olfactive and
visual, as well as physical (if a flying piece of the chip hits you). To
achieve activation of these functions, use at least 24V supply. Lead acid
and NiCd batteries are highly recommended. Lacking that use 220V or
better 380V mains.

Peter

--
http://www.piclist.com#nomail Going offline? Don't AutoReply us!
email listserv@mitvma.mit.edu with SET PICList DIGEST in the body