> to set the A port to digital output.  Now, however, when I put the pic
> in the circuit, it flashes the LED at about 950 MHz! I also tried the

Maybe you used an rfPIC by mistake ;)

You could try one of the blink programs at www.voti.nl/wisp628, just to
check your hardware.

Wouter van Ooijen
--
Van Ooijen Technische Informatica: http://www.voti.nl
Jal compiler, Wisp programmer, WLoader bootloader, PICs kopen

--
http://www.piclist.com hint: The PICList is archived three different
ways.  See http://www.piclist.com/#archives for details.