I'm working with a 240x128 graphic LCD  based on the Sanyo LC7981. In
graphics mode, you send the pixels a byte at a time. Each byte represents
8 HORIZONTAL pixels with the lsb on the left. I've tried using bmp2asm
and fntcvtr to convert bmp files to a table I can send the LCD. Both of
these seem to have a byte represent a VERTICAL column of 8 pixels. So
(with, for example bmp2asm), if I put in a bmp with a single horizontal
line, I end up with a row of 8 pixel high short vertical lines.
        Anyone have any ideas on how to fix this? Ideally, I'd like a bunch of
bytes ready to dump to the LCD and not have to do on the fly processing.

THANKS!

Harold



FCC Rules Online at http://hallikainen.com/FccRules
Lighting control for theatre and television at http://www.dovesystems.com

Reach broadcasters, engineers, manufacturers, compliance labs, and
attorneys.
Advertise at http://www.hallikainen.com/FccRules/ .


________________________________________________________________
GET INTERNET ACCESS FROM JUNO!
Juno offers FREE or PREMIUM Internet access for less!
Join Juno today!  For your FREE software, visit:
http://dl.www.juno.com/get/web/.

--
http://www.piclist.com hint: The PICList is archived three different
ways.  See http://www.piclist.com/#archives for details.