I assume you meant "...should NOT be touched..."? Cheers, -Neil. -----Original Message----- From: pic microcontroller discussion list [mailto:PICLIST@MITVMA.MIT.EDU]On Behalf Of Bob Ammerman Sent: Tuesday, June 11, 2002 11:10 PM To: PICLIST@MITVMA.MIT.EDU Subject: Re: [PIC]: IRP changes? The IRP bit should be touched if you don't do anything to explicitly change it. Bob Ammerman RAm Systems ----- Original Message ----- From: "Pic Dude" To: Sent: Tuesday, June 11, 2002 10:27 PM Subject: [PIC]: IRP changes? > Other than my explicit writes to the STATUS register (either thru writing > the whole byte) or thru bcf/bsf, is there anything else that can overwrite > the IRP bit in that register? I ask because I have a bunch of > ' bcf STATUS,IRP' instructions strewn over my code just before doing > any indirect addressing and would like to optimize by removing these. > > Cheers, > -Neil. > > -- > http://www.piclist.com hint: PICList Posts must start with ONE topic: > [PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads > > > -- http://www.piclist.com hint: The list server can filter out subtopics (like ads or off topics) for you. See http://www.piclist.com/#topics -- http://www.piclist.com hint: The list server can filter out subtopics (like ads or off topics) for you. See http://www.piclist.com/#topics