> Using the F877, I have PortA configured for analog inputs, and had 10K
pots.
> Seemed to work ok, I had a watch window set up, and a breakpoint right
after
> the read sequences (for 4 pots).
>
> I've changed the pots to 50K now, and upped the aquisition time, but the
> values seem to be way off now, and are affected by each other.

Microchip specifies the A/D source should be 10Kohm or less.  Yours could be
2.5 times higher, so you should either use 20Kohm pots max, or buffer the
voltages.


*****************************************************************
Embed Inc, embedded system specialists in Littleton Massachusetts
(978) 742-9014, http://www.embedinc.com

--
http://www.piclist.com hint: PICList Posts must start with ONE topic:
[PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads