if you look at the page that Dave Mumert sent at:
http://www.geocities.com/IECMaster/circuits1/cir_rfv030.html

My question refer to the input of the opamp, if I connect many opamps to one
source with so many resistors on the input, shouldn't it effect the source
signal power? maybe I'll need to amplify the initial signal source? so each
opamp get it's "standard" signal power.

hope that everybody understand what i write.

Regards

Tal Bejerano
AMC - ISRAEL


-----Original Message-----
From: pic microcontroller discussion list
[mailto:PICLIST@MITVMA.MIT.EDU]On Behalf Of Dave Mumert
Sent: Sunday, June 09, 2002 8:05 PM
To: PICLIST@MITVMA.MIT.EDU
Subject: [EE]: Re: distributing video signal


Hi Tal

Try these
http://www.elantec.com/pages/pdf/d42009.pdf
http://www.geocities.com/IECMaster/circuits1/cir_rfv030.html

Dave

> when distributing one video signal to more then one amplifier using
hi-freq
> Operational Amplifier, do I need to distribute as well the inputs for all
> opamps or just connect them all together?

--
http://www.piclist.com#nomail Going offline? Don't AutoReply us!
email listserv@mitvma.mit.edu with SET PICList DIGEST in the body

--
http://www.piclist.com hint: To leave the PICList
mailto:piclist-unsubscribe-request@mitvma.mit.edu