Hi Tal,

Maybe you are not aware of it but all the messages that you send to the list
include formatted text rather than
plain HTML as the rest of us do.

On my mail client for example, your messages are rendered using tiny fonts
and don't looks
very good.

You may want to change the setting of your Outlook to send by default
Plain Text  (try under Tools | Options | Mail Format ).

As for English speaking parents, I would not worry much about it, some of
the best parents
in the world don't speak English at all.  ;-)

Tal Dayan


> -----Original Message-----
> From: pic microcontroller discussion list
> [mailto:PICLIST@MITVMA.MIT.EDU]On Behalf Of Tal Bejerano - AMC
> Sent: Sunday, June 09, 2002 7:32 AM
> To: PICLIST@MITVMA.MIT.EDU
> Subject: Re: [EE]: distributing video signal
>
>
> Olin
>
> Sorry that I didn't born to English speaking parents.
>
> Regards
>
> Tal Bejerano
> AMC - ISRAEL
>
>
> -----Original Message-----
> From: pic microcontroller discussion list
> [mailto:PICLIST@MITVMA.MIT.EDU]On Behalf Of Olin Lathrop
> Sent: Sunday, June 09, 2002 1:41 PM
> To: PICLIST@MITVMA.MIT.EDU
> Subject: Re: [EE]: distributing video signal
>
>
> > I'm reposting again if the message didn't enter the list...
>
> We got it the first time.  You are not owed an answer here.
>
> I can't speak for others, but I didn't reply because your question was so
> sloppily written that it wasn't immediately obvious what you were asking.
> Care and neatness matter.  A sloppy question in effect says "I'm more
> important than you are", which is not a smart thing to say to someone you
> want a favor from.  I also might have taken a little more trouble
> to look at
> the question if it hadn't been sent using HTML.  The proper
> format is plain
> text wrapped to no more than 80 character lines.  I know this has been
> pointed out to you before, so I can only conclude you are too arrogant to
> fix it.
>
> > Hi
> >
> > when distributing one video signal to more then one amplifier using
> hi-freq
> > Operational Amplifier, do I need to distribute as well the
> inputs for all
> > opamps or just connect them all together?
> >
> > same question for audio amplifiers...
> >
> > Regards
> >
> > Tal Bejerano
> > AMC - ISRAEL
>
>
> *****************************************************************
> Embed Inc, embedded system specialists in Littleton Massachusetts
> (978) 742-9014, http://www.embedinc.com
>
> --
> http://www.piclist.com#nomail Going offline? Don't AutoReply us!
> email listserv@mitvma.mit.edu with SET PICList DIGEST in the body
>
> --
> http://www.piclist.com#nomail Going offline? Don't AutoReply us!
> email listserv@mitvma.mit.edu with SET PICList DIGEST in the body
>
>

--
http://www.piclist.com#nomail Going offline? Don't AutoReply us!
email listserv@mitvma.mit.edu with SET PICList DIGEST in the body