If you want to see the Gerber output graphically, then you will need to get
a Gerber viewer.  This is a good idea to review the Gerbers before sending
them to a board house, make sure your dimension layer is really on the
print, that you didn't output the top and bottom copper layers on the same
plot, and other such goofs.

There are several good free Gerber viewers.  My favorite is GC-Prevue from
Graphicode  www.graphicode.com
There is another one from Lanier, and from CamCad.

The programs are pretty self-explanatory, and almost always crippleware for
free, but if all you are doing is reviewing Gerbers, not editing them, then
these will work fine for you.

--Lawrence


----- Original Message -----
From: "Chris Loiacono" <chris@MAIL2ASI.COM>
To: <PICLIST@MITVMA.MIT.EDU>
Sent: Wednesday, June 05, 2002 1:01 PM
Subject: Re: [PIC]: Eagle exporting


> Here's another one:
> Is there a way to view the Eagle's processors result?
>
> Chris
>
> > Subject: Re: [PIC]: Eagle exporting
> >
> >
> > 1. Open your BRD project.
> > 2. File/CAM Procesor (or CAM button in tool menu)
> > 3. In CAM Procesor window: File/Open/Job
> > 4. Select "gerb274x.cam"
> > 5. Press Proces JOB
> > 6. 6 files will be generated (in project folder probably)
> > with BRD name and
> > extension  .CMP .GPI .PLC .SOL .STC .STS
> >
> > NOTE : You can change folder to be generated those files if
> > you set path in
> > File: for exm.
> > C:\Temp\.cmp for Component side, C:\Temp\.sol for Solder side
> > .... for all 5
> > tabs
> >
>
> --
> http://www.piclist.com hint: To leave the PICList
> mailto:piclist-unsubscribe-request@mitvma.mit.edu
>
>

--
http://www.piclist.com hint: To leave the PICList
mailto:piclist-unsubscribe-request@mitvma.mit.edu