I use a standard text editor to view the output files -
and I thought Eagle had a text editor built-in.

These turn out (and had better be!) standard text files.

Jim

----- Original Message -----
From: "Chris Loiacono" <chris@MAIL2ASI.COM>
To: <PICLIST@MITVMA.MIT.EDU>
Sent: Wednesday, June 05, 2002 1:01 PM
Subject: Re: [PIC]: Eagle exporting


> Here's another one:
> Is there a way to view the Eagle's processors result?
>
> Chris
>
> > Subject: Re: [PIC]: Eagle exporting
> >
> >
> > 1. Open your BRD project.
> > 2. File/CAM Procesor (or CAM button in tool menu)
> > 3. In CAM Procesor window: File/Open/Job
> > 4. Select "gerb274x.cam"
> > 5. Press Proces JOB
> > 6. 6 files will be generated (in project folder probably)
> > with BRD name and
> > extension  .CMP .GPI .PLC .SOL .STC .STS
> >
> > NOTE : You can change folder to be generated those files if
> > you set path in
> > File: for exm.
> > C:\Temp\.cmp for Component side, C:\Temp\.sol for Solder side
> > .... for all 5
> > tabs
> >
>

--
http://www.piclist.com hint: To leave the PICList
mailto:piclist-unsubscribe-request@mitvma.mit.edu