On 5 Jun 2002 at 1:40, Guillermo Rodriguez Garcia wrote:

> Thomas,
>
> Thanks for the reply! But since right after that the SS pin
> is configured as an input, shouldn't it work anyway?

It might just work, but why not just set the pin high anyway.
It could be the input is jammed!
The SPI is proven to be somewhat broken already,
I now suspect EVERYTHING that could go wrong!
>
> Thanks,
> G.
>
> At 13:08 04/06/2002 -0400, Thomas C. Sefranek wrote:
> >"The (SLAVE SELECT) pin must NOT be driven LOW for the SS pin to
> >function as an input."
> >
> > > Setup
> > >      ; port initialization
> > >      bcf     STATUS,RP0          ; sets bank 0
> > >      movlw   b'00000000' <------ THIS IS DRIVING THE SS pin LOW!!!
> > >      movwf   PORTA
>
> --
> http://www.piclist.com#nomail Going offline? Don't AutoReply us!
> email listserv@mitvma.mit.edu with SET PICList DIGEST in the body
>
>


  *
  |  __O    Thomas C. Sefranek  tcs@cmcorp.com
  |_-\<,_   Amateur Radio Operator: WA1RHP
  (*)/ (*)  Bicycle mobile on 145.41, 448.625 MHz

ARRL Instructor, Technical Specialist, VE Contact.
http://hamradio.cmcorp.com/inventory/Inventory.html
http://www.harvardrepeater.org

--
http://www.piclist.com#nomail Going offline? Don't AutoReply us!
email listserv@mitvma.mit.edu with SET PICList DIGEST in the body