Thomas,

Thanks for the reply! But since right after that the SS pin
is configured as an input, shouldn't it work anyway?

Thanks,
G.

At 13:08 04/06/2002 -0400, Thomas C. Sefranek wrote:
>"The (SLAVE SELECT) pin must NOT be driven LOW for the SS pin to
>function as an input."
>
> > Setup
> >      ; port initialization
> >      bcf     STATUS,RP0          ; sets bank 0
> >      movlw   b'00000000' <------ THIS IS DRIVING THE SS pin LOW!!!
> >      movwf   PORTA

--
http://www.piclist.com#nomail Going offline? Don't AutoReply us!
email listserv@mitvma.mit.edu with SET PICList DIGEST in the body