Roman,

The hot box consists of two 25 watt globes fitted to a large foam
container.  The globes are wired to a dimmer switch which allows me to
control the temperature.  I don't need prescise regulation, more over
temp protection.  For example the heating turned off at about 40 deg. C
(104F) and back on again at 20 deg. C (68F).  I would love to hear about
your incubator.

Michael

> -----Original Message-----
> From: pic microcontroller discussion list
> [mailto:PICLIST@MITVMA.MIT.EDU] On Behalf Of Roman Black
> Sent: Monday, 3 June 2002 10:21 PM
> To: PICLIST@MITVMA.MIT.EDU
> Subject: Re: [PIC] Thermostat circuit needed
>
>
> Hi Michael, can you give more details? I have a
> home-made "incubator" here I use for curing polyester
> and epoxy resins, do you have specific size or temp
> that you need to work around?
> -Roman
>
>
>
> Michael Imsic wrote:
> >
> > Does anyone have a circuit for a thermostat?  I would like
> to build on
> > the control the temperateure within a "hotbox" I have made
> for curing
> > fibreglass layups.
> >
> > Michael
> >
> > Melbourne, Australia
> > ICQ 3481522
>
> --
> http://www.piclist.com hint: The PICList is archived three
> different ways.  See http://www.piclist.com/#archives for details.
>
>

--
http://www.piclist.com hint: The PICList is archived three different
ways.  See http://www.piclist.com/#archives for details.