Thanks Sean !
I c how it done i'll try it.

Regards

Tal Bejerano
AMC - ISRAEL


-----Original Message-----
From: pic microcontroller discussion list
[mailto:PICLIST@MITVMA.MIT.EDU]On Behalf Of Sean Alcorn - Avion Sydney
Sent: Friday, May 31, 2002 12:30 PM
To: PICLIST@MITVMA.MIT.EDU
Subject: Re: [PIC]: Eagle parts pads


> is there any way to change the original pads in eagle? the parts
(especially
> in the RCL) are very small. I know I can put a pad on the parts pad but
it's
> to much time.

Tal, just open the library (LBR) file and click edit package. I do it all
the time "on the fly" as I use bigger pads on Single sided boards.

I have made up a couple of my own library files so that my own parts don't
get wiped out every time I upgrade or re-load eagle. You can make your own
libray called talsrcl.lbr (for example). To make your own version of a
component;

1. Open up the original eagle library
2. Edit the required package
3. Use the group tool to group the whole package
4. Choose "Cut" and then right click on the origin.
5. Close the library without saving (unless you want any changes to be
permanent)
6. Open (or create) the talsrcl.lbr file
7. Create a new package & give it a name
8. Click paste
9. Click on the origin
10. Modify to your heart's content.
11. Save your new library.

Good luck!

Cheers,

Sean

--
http://www.piclist.com hint: To leave the PICList
mailto:piclist-unsubscribe-request@mitvma.mit.edu

--
http://www.piclist.com hint: To leave the PICList
mailto:piclist-unsubscribe-request@mitvma.mit.edu