> About the caps' I found that I use 16v instead of using 35v.
> the transformer is what I have in my junk box, you know those who are
packet
> in plastic case the deliver about 40mA. I will buy 12vx2 tomorrow and
check
> again.
> about the consumption: I didn't measure it but data say "6mA" it's a
LM4558.

Does that include the load?  Probably not.

> other problem I have is "hum" look like main 50hz.

If your caps were getting warm, then they were drawing current, which would
aggrevate the hum.  I wouldn't chase that until the caps are right and the
voltages look reasonable with no load.  Then connect a known load, like a
resistor, and see how much the supply droops and if anything gets hot.


*****************************************************************
Embed Inc, embedded system specialists in Littleton Massachusetts
(978) 742-9014, http://www.embedinc.com

--
http://www.piclist.com#nomail Going offline? Don't AutoReply us!
email listserv@mitvma.mit.edu with SET PICList DIGEST in the body