Yep, got 2 underscores.

Tom Messenger writes:

> Just a wild guess...
>
> Does your config statement have *2* underscores ahead of it?
> This is often missed.
>
> It should look like this:   __CONFIG
> and not like this:           _CONFIG
>
> Tom M.
>
> At 03:41 PM 5/27/02 GMT, you wrote:
>>My program is interrupting and resetting at 18ms.  If I put 'clrwdt' in the
>>program it will stop.  I clearly have '_wdt_off' in my configuration word.
>>
>>I have used 'clrf STATUS' and 'swapf STATUS' in my program, but the
>>documentation indicates that these commands will not affect the bit that
>>controls the WDT.  Is there something that I am missing here?  I can post
>>the complete code if you need.
>>
>>The other thing is that when I program the chip with the 'fix' using clwdt,
>>the program does not run.
>>
>>Thanks
>>
>>--
>>http://www.piclist.com hint: PICList Posts must start with ONE topic:
>>[PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads
>>
>>
>>
>
> --
> http://www.piclist.com hint: PICList Posts must start with ONE topic:
> [PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads
>
>

--
http://www.piclist.com hint: PICList Posts must start with ONE topic:
[PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads