Peter , Thanks for your feedback.
My 16F628 arrives next week and I will work on your recommendation.
Regards
Rajiv Thakur


----- Original Message -----
From: "Peter Anderson" <pha555@YAHOO.COM>
To: <PICLIST@MITVMA.MIT.EDU>
Sent: Tuesday, May 21, 2002 2:51 PM
Subject: Re: [PIC] Wrap13A Programmer + 16F628 +redback7


> "RedBack" is simply a name the developer has given to
> the firmware.
>
> The problem involves the LVP pin (terminal 10) of the
> PIC16F628 and the Newfound site offers a number of
> alternatives.
>
> I have found that placing a small piece of wire
> insulation on terminal 10 and then using the 40-pin
> ZIF has been the simplest.  In theory, the LVP pin
> should be isolated and at ground, but I have found
> this simple isolation has worked for me.
>
> Peter H Anderson, http://www.phanderson.com
>
>
> --- Rajiv Thakur <rajiv_thakur@VSNL.COM> wrote:
> > Hi ;
> >
> > Issue: Programming a 16F628 with WARP 13A progr with
> > redback version 7.
> >
> > Problem:
> >
> > I have a WARP 13 A Programmer And the
> > Help>About>firmware shows that the
> > Redback version is 7.
> >
> > (a) What does the Redback stand for?
> > (b) The Newfound electronics website says that this
>
>
> __________________________________________________
> Do You Yahoo!?
> LAUNCH - Your Yahoo! Music Experience
> http://launch.yahoo.com
>
> --
> http://www.piclist.com hint: To leave the PICList
> mailto:piclist-unsubscribe-request@mitvma.mit.edu
>
>
>

--
http://www.piclist.com hint: To leave the PICList
mailto:piclist-unsubscribe-request@mitvma.mit.edu