"RedBack" is simply a name the developer has given to
the firmware.

The problem involves the LVP pin (terminal 10) of the
PIC16F628 and the Newfound site offers a number of
alternatives.

I have found that placing a small piece of wire
insulation on terminal 10 and then using the 40-pin
ZIF has been the simplest.  In theory, the LVP pin
should be isolated and at ground, but I have found
this simple isolation has worked for me.

Peter H Anderson, http://www.phanderson.com


--- Rajiv Thakur <rajiv_thakur@VSNL.COM> wrote:
> Hi ;
>
> Issue: Programming a 16F628 with WARP 13A progr with
> redback version 7.
>
> Problem:
>
> I have a WARP 13 A Programmer And the
> Help>About>firmware shows that the
> Redback version is 7.
>
> (a) What does the Redback stand for?
> (b) The Newfound electronics website says that this


__________________________________________________
Do You Yahoo!?
LAUNCH - Your Yahoo! Music Experience
http://launch.yahoo.com

--
http://www.piclist.com hint: To leave the PICList
mailto:piclist-unsubscribe-request@mitvma.mit.edu