> In keeping with my philosophy of minimal component-count in any circuit,
> I'm wondering if it is an acceptable strategy to run multiplexed 7-segment
> LED's thru a 16F872 output port w/o the use of current-limiting resistors,
> when the current I need is the max rating of the output port (25ma source
> or sink).

No, bad idea.  The 25mA spec means that is the max you should allow the port
to source or sink, not the maximum it will source or sink when tied to power
or ground or whatever.


*****************************************************************
Embed Inc, embedded system specialists in Littleton Massachusetts
(978) 742-9014, http://www.embedinc.com

--
http://www.piclist.com hint: The PICList is archived three different
ways.  See http://www.piclist.com/#archives for details.