Olimex had a serial programmer with a six pin plug. They had a separate page with the pinout. I can't seem to find it now though. Colin Hazelwood Lyle @MITVMA.MIT.EDU> on 05/17/2002 04:56:23 AM Please respond to pic microcontroller discussion list Sent by: pic microcontroller discussion list To: PICLIST@MITVMA.MIT.EDU cc: (bcc: Colin Constant-NR/RMD/Raytheon/CA) Subject: [PIC]: ICSP Connector pinout? Greetings all, I am sending my data off to the board house next week. (thanks to everyone for the eagle pointers!) My layout includes a 5 pin connector for ICSP. I was able to reserve RB6 and RB7 exclusively for this, and I've added a jumper between VCC and VDD so that the chip power can be isolated while in circuit. I am wondering if there is a "standard" order for the pins in this connector. I don't mind making up my own, but if there is a common sequence, I'd prefer to follow it. I'm using a polarized header, AMP 5 pin 0.1" pitch, AMP #641213-5,DK #A23900-ND Thanks, Lyle Hazelwood -- http://www.piclist.com hint: PICList Posts must start with ONE topic: [PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads -- http://www.piclist.com hint: PICList Posts must start with ONE topic: [PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads