On Tue, 14 May 2002, Andy Shaw wrote:

>Hi Dwayne,
>Since I'm going to be going down this road soon I'd like to understand how
>to make this work...

The L shaped scrap board acts as a spacer between the films so they align
perfectly (w/o the scrap they are inclined between the taped edges and the
useful film - this causes some misalignment - as someone else said, it is
smaller if the taped parts are farther away from the active part).

Peter

>
>----- Original Message -----
>From: "Dwayne Reid" <dwayner@PLANET.EON.NET>
>> Tuck your sensitized board into the pocket formed by the transparencies
>and
>> holder.  Put it into the exposure frame and expose.
>>
>
>Ok what is the "exposure frame" and how do you do the exposure. My UV box
>will only allow a single side to exposed at a time. So how do I ensure
>things don't move between exposing one side and the other. Is this what the
>frame is for? What does it look like?
>
>Thanks
>
>Andy
>
>--
>http://www.piclist.com hint: The PICList is archived three different
>ways.  See http://www.piclist.com/#archives for details.
>
>
>

--
http://www.piclist.com hint: The PICList is archived three different
ways.  See http://www.piclist.com/#archives for details.