It shouldn't be hard to find a DAA interface (IIRC) which is a simple
approved phone line to device interface.  At that speed you could do all
the work on a PIC, and a pre-approved DAA would speed up your device
approval.

-Adam

A.J. Tufgar wrote:

>Hello all,
>          I'm looking for a cheap "modem on chip" solution, or even
>modem daughterboard.  So far I've found a few from the archives, but I'm
>wondering what current thoughts were.  I basically want to send about 20
>Kbytes of info over the telephone line within about 10 min.  So it
>doesn't have to be very fast.  I guess about 30 bytes/sec. would be
>fine.  Does anyone know where I could find such a chip or daughterboard
>cheaply?
>
>I've checked out zilog, but it seems like there are alot of support
>compnents.
>
>Thanks in advance,
>Aaron
>
>--
>http://www.piclist.com hint: The PICList is archived three different
>ways.  See http://www.piclist.com/#archives for details.
>
>
>
>
>

--
http://www.piclist.com hint: The PICList is archived three different
ways.  See http://www.piclist.com/#archives for details.