dewayne thanks for the info. i havent had a chance to finish the code but well get to it soon mike johnston ----- Original Message ----- From: "Dwayne Reid" To: Sent: Thursday, May 09, 2002 11:20 AM Subject: Re: a 16c54 clock desigin. > At 10:57 PM 5/8/02 -0500, Michael Johnston wrote: > >Andrew > >thanks for the code i tried this but ive ran into some problems for one > >thing is the bnz mnemonic usable with the c54 parts > > BNZ is one of several pre-defined macros built into MPASM. You can read > all about them in the MPASM data sheet - available from Microchip's web > site (document # 33014g). > > The built in macros help make code a bit easier to understand when coming > back to it after a long period of time. > > dwayne > > > Dwayne Reid > Trinity Electronics Systems Ltd Edmonton, AB, CANADA > (780) 489-3199 voice (780) 487-6397 fax > > Celebrating 18 years of Engineering Innovation (1984 - 2002) > .-. .-. .-. .-. .-. .-. .-. .-. .-. .- > `-' `-' `-' `-' `-' `-' `-' `-' `-' > Do NOT send unsolicited commercial email to this email address. > This message neither grants consent to receive unsolicited > commercial email nor is intended to solicit commercial email. > > -- > http://www.piclist.com hint: The PICList is archived three different > ways. See http://www.piclist.com/#archives for details. > -- http://www.piclist.com hint: The PICList is archived three different ways. See http://www.piclist.com/#archives for details.