I'm using a 16f874 looking through the data sheet it looks pretty simple =
to use the internal hardware
to control the eeprom. My question is if I write data to the eeprom what =
would my proggie check
to see if the transfer is complete?. Acording to the data sheet =
sspstat,bf only indicates transfer
complete in i2c mode. Do I need to use a delay before sending the next =
byte?.

--
http://www.piclist.com hint: PICList Posts must start with ONE topic:
[PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads