To my knowledge,  Microchip says somewhere that NT (which means WIN2K
too) won't run MPLAB.  I keep an old 100MHz 486 specifically for running
MPLAB beside my Pentium based main system.  It's a pain.

John Dammeyer


> -----Original Message-----
> From: pic microcontroller discussion list
> [mailto:PICLIST@MITVMA.MIT.EDU] On Behalf Of Ed Heath
> Sent: Thursday, May 02, 2002 10:04 AM
> To: PICLIST@MITVMA.MIT.EDU
> Subject: Re: [PIC]:CAN Development Board
>
>
> I am running NT and I have tried it on 2K
> I have installed Port95NT, I loaded it to get the CAN King
> software running.
> Microchip site said "Win95 or higher" I wonder?
>
> Ed Heath
>
>
> ----- Original Message -----
> From: "Nick Veys" <nick@VEYS.COM>
> To: <PICLIST@MITVMA.MIT.EDU>
> Sent: Wednesday, May 01, 2002 9:01 PM
> Subject: Re: [PIC]:CAN Development Board
>
>
> > If you are using an NT/2k/XP based system, you'll need a
> parallel port
> > driver as NT likes to protect its precious port...
> >
> > Google for port95nt.
> >
> > nick@veys.com | www.veys.com/nick
> >
> > > -----Original Message-----
> > > From: pic microcontroller discussion list
> > > [mailto:PICLIST@MITVMA.MIT.EDU] On Behalf Of Ed Heath
> > > Sent: Wednesday, May 01, 2002 6:20 PM
> > > To: PICLIST@MITVMA.MIT.EDU
> > > Subject: [PIC]:CAN Development Board
> > >
> > >
> > > Hey Guys,
> > >
> > > Have any of you played with the MCP250XX CAN dev board from
> > > Microchip. I put together a copy of the board with a MCP2510
> > > chip and the Node A ICSP
> > > programing port based on the Microchip doc. DS51266A. The
> > > problem is that the CanKing software connects and works fine
> > > with the board but the Microchip
> > > MPC250XX programing software will not detect the parallel
> > > port. I have downloaded
> > > both programs off the net and do not have the Microchip CD
> > > Rom software.
> > > Am I missing a driver or what?
> > >
> > > Thanks
> > >
> > > Ed Heath
> > >
> > > --
> > > http://www.piclist.com hint: To leave the PICList
> > mailto:piclist-unsubscribe-request@mitvma.mit.edu
> >
> > --
> > http://www.piclist.com hint: To leave the PICList
> > mailto:piclist-unsubscribe-request@mitvma.mit.edu
> >
> >
> >
>
> --
> http://www.piclist.com hint: PICList Posts must start with ONE topic:
> [PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads
>
>
>
>

--
http://www.piclist.com hint: PICList Posts must start with ONE topic:
[PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads