I need to interface an spi eeprom to a 16f874 I been reading it has some =
built in hardware for this and i2c.
But I need to set it up with an rs232 to my pc later on I'm not to clear =
from the data sheets if spi and an rs232
interface would need to use the same rx tx pins on the pic can I have =
both at once using the built in serial
hardware?.
Thanks
James

--
http://www.piclist.com#nomail Going offline? Don't AutoReply us!
email listserv@mitvma.mit.edu with SET PICList DIGEST in the body