From your other post and this is seems that you want to be able to erase
one or more Flash PIC's such as the 16F84A.  I'm not familiar with the
JDM Programmer, so you could ask their support directly, but I use a
homemade Tait programmer/software under Linux, which does support
erase, even with prior code protection.  There's a simple -e switch to do
this.  Perhaps this might be a solution if the JDM doesn't do what you
need.  I know you are not asking for another programmer, but I offer
this solution only because these things are really simple to build and
low-cost.




-----Original Message-----
From: pic microcontroller discussion list [mailto:PICLIST@MITVMA.MIT.EDU]On
Behalf Of AMIN
Sent: Thursday, May 30, 2002 4:25 AM
To: PICLIST@MITVMA.MIT.EDU
Subject: help


thanks for repplying

from the microchip data sheet i found that the pic 16F84A support bulk
erase,but i didn't found any software that can accomplish this and that
support the JDM programmer is ther any software availlable and can do it

thank you

--
http://www.piclist.com#nomail Going offline? Don't AutoReply us!
email listserv@mitvma.mit.edu with SET PICList DIGEST in the body

--
http://www.piclist.com#nomail Going offline? Don't AutoReply us!
email listserv@mitvma.mit.edu with SET PICList DIGEST in the body