Hey Guys,

Have any of you played with the MCP250XX CAN dev board from Microchip. I =
put together
a copy of the board with a MCP2510 chip and the Node A ICSP programing =
port based on
the doc. DS51266A. The problem is that the CanKing software connects and =
works fine=20
with the board but the Microchip MPC250XX programing software will not =
detect the=20
parallel port. I have downloaded both programs off the net and do not =
have the Microchip
CD Rom software. Am I missing a driver or what?

Thanks

Ed Heath=20

--
http://www.piclist.com#nomail Going offline? Don't AutoReply us!
email listserv@mitvma.mit.edu with SET PICList DIGEST in the body