> >         bsf     STATUS,RP0      ; select register bank 1
> >         bcf     STATUS,RP1      ;
>
>All this manual setting of bank bits makes me nervous.  Looking up the
>registers you used and verifying you set the right banks is a waste of time
>when the assembler can do most of this for you.

Err, really! I wasn't aware of that! I'll have to have a closer look at
what the assembler does and doesn't do. Thanks,

John


_______________________________________________________________________
John Brown
PhD (Clinical Psychology) candidate
                                       Email:  john.brown@anu.edu.au
School of Psychology                  Phone:  (02) 6125-3827
Room 124, Building 39, Psychology     Fax:    (02) 6125-0499
The Australian National University    Mobile: 0429 455 504
ACTON ACT 0200   Web: http://www.anu.edu.au/psychology/staff/BrownJ.htm

--
http://www.piclist.com hint: To leave the PICList
mailto:piclist-unsubscribe-request@mitvma.mit.edu