>Point a video camera at the screen, tape it and freeze frame the result?
>
>This will only work if the waveform occurs while the CCD is capturing the
>image.
>
>Bob Ammerman
>RAm Systems

Very good idea! A CCD camera used under low light conditions is in the
integration mode most of the time so the probability to catch the signal
or its afterglow trail is high! I wish I had thought of that. Perhaps
capturing in moovie mode with a PC connected camera (USB etc) will have
the same result if the frame rate is high and the light level low (shade
out all room light using a cardboard mask and turn on the scope reticle
backlight on low - you   may not need that, the trace will illuminate
some of the reticle).

Peter

--
http://www.piclist.com#nomail Going offline? Don't AutoReply us!
email listserv@mitvma.mit.edu with SET PICList DIGEST in the body