If all you're looking for is a simple on/off based on /any/ ir remote
control signal, I'd look at an integrated IR receiver (40kHz), and a one
or two second one shot circuit (such as a 555) going into a flip flop.

The IR thingy will cost a buck or two, but the other chips can be had
for a buck total.  To make it simple, shell out 3 bucks for a solid
state relay.  Or go even simpler and use a 12c508 to replace the one
shot and the flip flop.  An extra buck or two, but it'd be smaller.

-Adam

Tal Bejerano - AMC wrote:

>Hi 2 All
>
>I admit, I'm lazy! so I am looking for a circuit to switch the room light,
>the vent, etc..
>anyone see such circuit? can be pic integrated.
>I look for any on/off switch with any IR remote.
>
>Regards And thanks
>
>Tal Bejerano
>AMC - ISRAEL
>
>--
>http://www.piclist.com hint: The PICList is archived three different
>ways.  See http://www.piclist.com/#archives for details.
>
>
>
>
>

--
http://www.piclist.com hint: The PICList is archived three different
ways.  See http://www.piclist.com/#archives for details.