Hello All,

Thanks to all who replied to my question, I found the magic command of
the following.

Run---cam2print.ulp

From there you can print all your different layers and silkscreens in
the proper sizes that would go to your mill house.


Thanks Again
Steve



-----Original Message-----
From: pic microcontroller discussion list
[mailto:PICLIST@MITVMA.MIT.EDU] On Behalf Of Anand Dhuru
Sent: Monday, April 15, 2002 12:17 AM
To: PICLIST@MITVMA.MIT.EDU
Subject: Re: [EE]:Eagle software board printing

Steve, the printing in Eagle is somewhat WYSIWYG; it prints the layers
seeing on the screen at the time. Therefore, use the view - display/hide
layers to show only the layers you want printed on that particular
sheet. As
for the dimensioning, there is a scaling option that is available when
you
give the print option to gat it printed 1X, 2X and so on.

Regards,

Anand

----- Original Message -----
From: "Steve Kasm" <kcer@COGECO.CA>
To: <PICLIST@MITVMA.MIT.EDU>
Sent: Monday, April 15, 2002 6:48 AM
Subject: [EE]:Eagle software board printing


> Hello All,
>
>
>
> I am new to the eagle software, I have created a schematic that passes
> all erc checks and then created the board and did an auto route. I
don't
> have any errors.
>
>
>
> My question, I would like to print the layers of this board using a
> Brother HL1440 printer on transparency sheets. I can't seem to figure
> out how to get an actual size printout of the top, bottom, and
> silkscreen layers.
>
>
>
> Any help would be appreciated,
>
>
>
> Thank you,
>
> Steve
>
> --
> http://www.piclist.com hint: The PICList is archived three different
> ways.  See http://www.piclist.com/#archives for details.
>
>
>

--
http://www.piclist.com#nomail Going offline? Don't AutoReply us!
email listserv@mitvma.mit.edu with SET PICList DIGEST in the body

--
http://www.piclist.com hint: The list server can filter out subtopics
(like ads or off topics) for you. See http://www.piclist.com/#topics