If you set scale = 1, it should print out correctly unless there are
some weird drivers for you printer.

nick@veys.com | www.veys.com/nick

> -----Original Message-----
> From: pic microcontroller discussion list
> [mailto:PICLIST@MITVMA.MIT.EDU] On Behalf Of Steve Kasm
> Sent: Sunday, April 14, 2002 8:18 PM
> To: PICLIST@MITVMA.MIT.EDU
> Subject: [EE]:Eagle software board printing
>
>
> Hello All,
>
>
>
> I am new to the eagle software, I have created a schematic
> that passes all erc checks and then created the board and did
> an auto route. I don't have any errors.
>
>
>
> My question, I would like to print the layers of this board
> using a Brother HL1440 printer on transparency sheets. I
> can't seem to figure out how to get an actual size printout
> of the top, bottom, and silkscreen layers.
>
>
>
> Any help would be appreciated,
>
>
>
> Thank you,
>
> Steve
>
> --
> http://www.piclist.com hint: The PICList is archived three
> different ways.  See http://www.piclist.com/#archives for details.
>
>
>

--
http://www.piclist.com hint: The PICList is archived three different
ways.  See http://www.piclist.com/#archives for details.