Ken,

In the PCB editing panel, go Place > Pad, then hit the TAB key, which will
bring up the Pad Properties edit box.  In here, edit the pad properties to
your liking, selecting Shape as Rectangle, and Layer as MultiLayer, and
input suitable thru-hole size.

File > CAM Manager brings up a CAM wizard (if not previously set up) where
you define your CAM requirements, alternatively right-clicking once the CAM
panel has been opened allows you access to CAM options.

IIRC, there is a tutorial provided with the package, or on the web site
www.protel.com, which will help you familiarize yourself with the
basics.  Good luck.

John

At 02/04/10 21:07 -0400, you wrote:
>Dear all,
>
>In my current PCB design in Protel99SE, I need to place some rectangular
>plate-through hole whis size is about 0.45mm x 1.2mm and 0.45mm x 0.7mm
>
>Would someone can help me? I don't know how to place such rectangular
>plate-through hole in PCB, and generate a proper Gerber for manufacturer.

--
http://www.piclist.com hint: To leave the PICList
mailto:piclist-unsubscribe-request@mitvma.mit.edu